Holography

Technical specifications

A single film for all operating processes

By utilising its proprietary Spectral Sensitivity Technology, FUJIFILM has achieved a panchromatic film that responds to almost all visible wavelength laser beams - including ruby laser.

This negates the necessity of separate film for each different wavelength, and allows a single film to be used for the whole spectrum of lasers, from blue lasers to red lasers.

Highest sensitivity and detail

The newly developed nanometer, ultrafine silver halide particles allow full compatibility with 100-200 microkoule high sensitivity. The emulsion used for the hologram enables precision recording and reproduction with interference fringes, resulting in a hologram that boasts the world's highest images quality.

Grain size - 30-40nm
Structure - 8.7 mil (220 痠)
Sensitised emulsion = 8 痠
Tri-Acetate base = 205痠
Anti-curl emulsion = 7 痠Resolution >3000 lines/mm
Diffraction efficiency > 45% (CWC2/FeEDTA process)
Base - 8 mil (205痠) TAC (Tri-Acetate cellulose)

Easy reproduction of individual and blended colours

A single film can be used for individual colour holograms through to individual red, green or blue lasers. The high diffraction efficiency rate also enables bright and vivid images.

Responding to transmitted beams with a TAC base

The hologram is supported with FUJIFILM's TAC (TriAcetyCellose) base highly acclaimed for its use as a display material. With a greatly reduced refraction rate, the laser enables precision recording and reproduction with interference fringes.

You can place your order through our e-shop.

A single film for all operating processes
By utilising its proprietary Spectral Sensitivity Technology, FUJIFILM has achieved a panchromatic film that responds to almost all visible wavelength laser beams - including ruby laser. This negates the necessity of separate film for each different wavelength, and allows a single film to be used for the whole spectrum of lasers, from blue lasers to red lasers.

Highest sensitivity and detail
The newly developed nanometer, ultrafine silver halide particles allow full compatibility with 100-200 microkoule high sensitivity. The emulsion used for the hologram enables precision recording and reproduction with interference fringes, resulting in a hologram that boasts the world's highest images quality.

Easy reproduction of individual and blended colours
A single film can be used for individual colour holograms through to individual red, green or blue lasers. The high diffraction efficiency rate also enables bright and vivid images.

Responding to transmitted beams with a TAC base
The hologram is supported with FUJIFILM's TAC (TriAcetyCellose) base highly acclaimed for its use as a display material. With a greatly reduced refraction rate, the laser enables precision recording and reproduction with interference fringes.