Europe Europe
FUJIFILM photo chemicals are designed for specific use in FUJIFILM minilabs.
The latest FUJIFILM minilab chemicals offer the lowest replenishment rates available on the market today. This, in turn, means the lowest effluent and waste volumes. Chemistry in standard packs is available for all CN-16Q, CN-16FA and CN-16L processors.
CN-16S and CN-16SER chemicals come in special packs designed to slot straight into the SC type film minilabs. Loading chemistry doesn't come any easier and the bottles are rinsed automatically to ensure that no concentrates remain in the bottle. This makes disposal even easier.
FUJIFILM CN-16SER chemistry for Fuji FP150SC, FP363SC and FP563SC film processors is a higher replenishment rate cartridge, specially designed and introduced to handle the very low film throughputs commonly found these days in many minilabs. This cartridge will give improved process quality and stability for anyone running with minimal film volumes. Further information is available - click here for an information sheet published by FUJIFILM in Tokyo, and here for a technical information sheet for the European market.
There is an extensive range for the different processes used in FUJIFILM minilabs and it is important to use the right type. Further information can be found by clicking here. Below you can find the process specifications.
If after looking at the below information you are still unsure which chemicals to use, send us an email.
For starter information, click here.
| Film Processes - Chemicals specifications |
