Chemicals for Agfa MSC100 / MSC101 Minilabs

Chemicals for MSC 100/101.d
Chemicals for FP1-71, FP2-71, FP3-71 (AP71)
Chemicals for FP1-72, FP2-72, FP3-72, FP 212, FP 100, FP 200, FP 300 (AP 72)
Film Box Chemicals for fp.210, d-lab.1


Chemicals for Agfa MSC 100 / 101

See also : Chemicals for Agfa (Paper) Minilabs, Chemicals for Agfa Prolabs The following products are recommended for use with Agfa MSC 100 and MSC 101.d film processors :

Product EnviroNeg Developer Replenisher Kit LR AC † EnviroNeg RA Bleach Replenisher AC * Negacolor RA Fixer & Replenisher EnviroNeg FF Superflo Stab MB AC Starters EnviroNeg Universal Developer Starter AC (for preparation of new developer tank solutions) Negacolor Ultra Bleach Starter ‡

To Make 2 x 5 L 2 x 5 L 4 x 5 L 2x (10x10L) (dosing bottle) 6 x 1 L concentrate 6 x 500ml

Cat No. 990 101 971 135 992 016 991 596 972 497 951 350

†For low volume C41 processors you should consider the use of EnviroNeg Developer AC (41 ml/135-24 film) or even EnviroNeg Developer 60 AC, with a replenishment rate of 60 ml/135-24 film, giving greatly improved process quality and ease of use by avoiding the need to retank your developer regularly as film volumes decrease.
* Air Control odour-free product. Use EnviroNeg RA Bleach Replenisher 10 AC if EnviroNeg Developer 60 AC is being used.
‡ Only required when retanking bleach if Negacolor RA Bleach is used -
not needed with EnviroNeg RA Bleach AC

A Product Information Sheet (PIS) for Agfa MSC 100 and MSC 101 film chemistry is available through esclusivo, giving mixing instructions and full technical details (for authorised users only).



Last updated : 24 February 2009