Chemicals for Agfa d-lab.3 Minilabs


Chemistry for Agfa d-lab.3

Fuji Hunt EnviroPrint chemicals for fast processing
  • For high throughput printers, Fuji Hunt offer EnviroPrint MP45 AC Developer for optimum quality
  • Replenishment rate just 60 ml/mē
  • Use with EnviroPrint Bleach-Fix 35 AC
  • For lower throughput printers, use Fuji Hunt EnviroPrint FP Developer MR at 90 ml/mē with EnviroPrint FP Bleach-Fix MR
  • Perfect for the 27 second development time of the d-lab.3
  • Automatic mixers available for large installations
  • A PDF file for this product is available through esclusivo, giving mixing instructions and full technical details (for authorised users only)
  • See below for more details of options available for the d-lab.3 - chemicals, pack sizes, catalogue numbers, etc.






Chemical listing for Agfa d-lab.3

The following products are recommended for use with Agfa d-lab.3 minilabs :

Product
To Make
Cat No.

RA4 Quick Starter
6 x 1L conc
961 904
† EnviroPrint Developer Replenisher MP45 AC, or
4 x 10L
997 361
‡ EnviroPrint FP Developer Replenisher MR
6 x 5 L
994 186
EnviroPrint FP Bleach-Fix Replenisher MR
2 x 10 L
992 487
EnviroPrint Bleach-Fix MP Starter AC
6 x 500 ml conc
992 420
EnviroPrint FP Super Stabilizer & Replenisher
2 x (25x5L) (dosing)
994 426

Notes :
† For high throughput only
‡ For medium throughput

Further information on d-lab.3 chemicals from Fuji Hunt can also be found in esclusivo, where you can download a PDF file (authorised users only).




Last updated : 21 March 2009