Paper Chemistry for Noritsu Minilabs

FUJIFILM can supply a complete range of Fuji Hunt products for use in Noritsu equipment, old and new, including all SM models. All products are fully tried and tested and can be used with complete confidence. The most commonly used products are for the standard 45 second RA4 process - described here - and for fast (20-30 second) RA4 process minilabs; others can easily be reached from the links below.

See also : Chemicals for Fast RA4 Noritsu Minilabs, Chemicals for Noritsu RA2-SM Minilabs

Selection of the best chemistry for your processor depends on developer time (the information below is for processors with a 45 second developer time - see the Fast Process pages if you have a developer time shorter than this) and how much paper you put through your processor. Most locations find the EnviroPrint Developer MP60 AC, running at 60 ml/mē, combined with EnviroPrint Bleach-Fix 70 AC (70 ml/mē) is an ideal combination. Other, very busy, locations may select chemistry with a lower replenishment rate; quieter locations may need chemistry with higher replenishment rates in order to maintain a good process.

For the Noritsu LPR-24 wide format minilab, we have prepared a special document to help you get the best possible results - click here for details.

The typical products required for these situations are shown in the list below. Many other pack sizes are available to meet all needs. If you have any questions about which is the most suitable developer for your processor, please contact your local FUJIFILM representative, or send us an email.

.

Product list

Click here to access the list which contains the main products.


If you need more information, please contact your local FUJIFILM representative, or send us an email.

Last updated : 11 June 2010